Worx WG722E, Инструкция по безопасности и эксплуатации. Оригинальные инструкции.

Страница: 10 / 16

10
Electric Lawn Mower WG722E
Keep clear of the discharge
opening at all times.
o) Do not transport the
lawnmower while the
power source is running.
p) Stop the machine and
disconnect the plug from
the mains. Make sure that
all moving parts have come
to complete stop.
- whenever you leave the
machine;
- before clearing blockages or
unclogging chute;
- before checking, cleaning or
working on the lawnmower;
- after striking a foreign
object. Inspect the
lawnmower for damage
and make repairs before
restarting and operating the
lawnmower.
if the lawnmower starts to
vibrate abnormally (check
immediately)
- inspect for damage;
- replace or repair any
damaged parts;
- check for and tighten any
loose parts.
Maintenance and storage
a) Keep all nuts, bolts and
screws tight to be sure the
machine is in safe working
condition;
b) Check the grass catcher
frequently for wear or
deterioration;
c) Replace worn or damaged
parts for safety. Use only
genuine replacement parts
and accessories.
d) Be careful during
adjustment of the machine
to prevent entrapment of
the fingers between moving
blades and fixed parts of the
machine.
e) On machines with multi
blade, take care as rotating
one blade can cause other
blades to rotate.
f) Always allow the machine
to cool down before storing.
g) When servicing the blades
be aware that, even though
the power source is
switched off, the blades can
still be moved.
Recommendation
To connect the machine only
to a supply circuit protected by
a residual current device (RCD)
with a tripping current of not
more than 30mA.