11
10
Electric Lawn Mower
WG717E
OPERATION
1. STARTING AND STOPPING (See Fig. D, E)
STARTING
Connect the plug to the mains and switch ON.
The switch box is provided with a lock-off
button to prevent accidental starting.
With one hand press and hold the Safety Button (5),
with the other hand squeeze the Switch Lever (1)
towards the handle, and release the Safety Button. The
machine is now started; wait until the product is at full
speed before cutting the grass. Then use both your
hands to hold the Switch Lever to keep it running.
STOPPING
Release the switch lever.
2. HOW TO MOW
For cutting convenience, it may be best to start
mowing at a point close to the power supply and to
work your way away from the supply. Mow the lawn
at a right angle from the power supply and place the
power cable to side which has already been cut.
When this occurs stop, remove the plug from the
power supply.
Release the switch lever, Clear any obstruction, then
restart it.
If the mower cuts out again increase the height of cut
to reduce the load on the motor.
WARNING!
When mowing do not allow the
motor to labor particularly in heavy conditions.
When the motor labors the speed of the motor drops
and you will hear a change in the motor sound, when
this occurs, stop mowing, release the switch lever and
raise the height of cut. Failure to do so could damage
the machine.
3. GRASS BAG FILLING INDICATOR(3) (See Fig. F)
To remind you immediately to empty when the Grass
Collection Bag is full, the mower provides an indicator
on the top of bag to show the collection status. And
you can follow as below:
Empty status: Flap float (a)
Fully status: Flap fall down (b)
1
1
2
a
b
D
E
F
