Worx NITRO WG749E, Руководство пользователя

Страница: 8 / 24

8
Cordless Lawn mower EN
or eyes. If contact has been made, wash the
affected area with copious amounts of water
and seek medical advice.
f) Keep battery pack clean and dry.
g) Wipe the battery pack terminals with a clean
dry cloth if they become dirty.
h) Battery pack needs to be charged before use.
Always refer to this instruction and use the
correct charging procedure.
i) Do not maintain battery pack on charge when
not in use.
j) After extended periods of storage, it may
be necessary to charge and discharge the
battery pack several times to obtain maximum
performance.
k) Recharge only with the charger specified by
WorxNITRO. Do not use any charger other than
that specifically provided for use with the
equipment.
l) Do not use any battery pack which is not
designed for use with the equipment.
m) Keep battery pack out of the reach of children.
n) Retain the original product literature for future
reference.
o) Remove the battery from the equipment when
not in use.
p) Dispose of properly.
q) Do not mix cells of different manufacture,
capacity, size or type within a device.
r) Keep the battery away from microwaves and
high pressure.
SYMBOLS
Read instruction handbook before
operation this machine
Keep bystanders away.
Beware of sharp blades. Blades
continue to rotate after the motor
is switched off- Remove disabling
device before maintenance
Batteries may enter water cycle if
disposed improperly, which can
be hazardous for ecosystem. Do
not dispose of waste batteries as
unsorted municipal waste.
Do not burn
Li-Ion battery This product has been
marked with a symbol relating to
‘separate collection’ for all battery
packs and battery pack. It will
then be recycled or dismantled in
order to reduce the impact on the
environment. Battery packs can be
hazardous for the environment and
for human health since they contain
hazardous substances.
Wear protective gloves.
Remove battery from the socket
before carrying out any adjustment,
servicing or maintenance.
Remove the key
Blade continues to rotate after
the machine is switched off. Wait
until all machine components have
completely stopped before touching
them
COMPONENT LIST
1. SELF-PROPEL SPEED-CONTROL LEVER
2. SELF-PROPEL SPEED CONTROL
3. OPERATING BAIL
4. HANDLE BAR
5. GRASS COLLECTION BAG
6. CUTTING HEIGHT ADJUSTMENT LEVER
7. CUTTING HEIGHT ADJUSTMENT POINTER
8. FRONT HANDLE