Worx BladeRunner X2 WX572, Инструкция по безопасности и эксплуатации

Страница: 13 / 16

BladeRunner
®
X2 WX572
13
OPERATING INSTRUCTIONS
NOTE:
Before using the tool, read the
instruction book carefully.
BladeRunner
® — A compact, easy-to-use
table-top tool for cutting wood, metal, plastic,
and ceramic tile. Lightweight and portable for
use right at the work area. Blade is stationary
while user moves the material for easier, more
precise work.
BEFORE PUTTING THE MACHINE INTO
OPERATION
1. All covers and safety devices have to
be properly fitted before the machine is
switched on.
2. It must be possible for the blade to run freely.
3. When working with wood that has been
processed before, watch out for foreign
bodies such as nails or screws etc.
4. Before you turn ON the switch, make
sure that the saw blade is correctly fitted
and that the machine’s moving parts run
smoothly.
5. If the cutting operation will produce a high
amount of dust, especially hazardous dust
such as ceramic tile or treated wood, connect
an effective vacuum to the vacuum port (9).
ASSEMBLY AND OPERATION
Action Figure
Guard arm installation See Fig. A1,A2
Blade installation See Fig. B1-B3
Blade changing See Fig. C
Stabilizer bracket adjustment See Fig. D1,D2
Guard adjustment
See Fig. E1,E2
On/off safety switch See Fig. F
Rip cut See Fig. G1-G3
Cross cut See Fig. H1,H2
Miter cut See Fig. I1,I2
Internal cut See Fig. J
Dust collection See Fig. K
Store the accessories See Fig. L1,L2,L3,L4
Carrying See Fig. M
MAINTENANCE
WARNING:
Remove the plug from the socket before
carrying out any adjustment, servicing or
maintenance.
To insure proper operation and extend tool
life, prevent dust from accumulating under the
table insert (5).
a) Be sure to use a vacuum or dust extractor
for dusty cutting operations such as
ceramic tile. (See Fig. N)
b) If dust accumulates, remove the Table Insert
by lifting the latch (e). (See Fig. O)
c) Vacuum out the dust in and around the
Blade Holder. (See Fig. P)
d) Reattach the Table Insert securely.
There are no user serviceable parts in your
power tool. Never use water or chemical
cleaners to clean your power tool. Wipe clean
with a dry cloth. Always store your power
tool in a dry place. Keep the motor ventilation
slots clean. Keep all working controls free of
dust. If you see some sparks flashing in the
ventilation slots, this is normal and will not
damage your power tool.
If the supply cord is damaged, it must be
replaced by the manufacturer, its service
agent or similarly qualified persons in order to
avoid a hazard.