Worx Nitro WX095 Series, Инструкция по безопасности и эксплуатации

Страница: 12 / 16

12
20V Jobsite Fan WX095 WX095.X
Starting & Stopping
Push the switch (8) button to start
and stop the fan as needed.
Make sure that the switch is in
the off position when the fan
is not in use
see figure
D
Change the speed
For Low Speed/ High Speed, push
the Speed adjustment button (6)
to / and front light will
turn on.
see figure
E
Hanging the fan and Adjusting head
It is inadvisable to hang
the fan in the ways that it
will impede fan’s operation and
contribute to cord’s damages. When
hanging, be careful to secure the
fan to avoid it from falling which
could cause injury or damage.
see figure
F
MAINTENANCE
WARNING: Always remove or disconnect
battery pack before adjusting, cleaning,
servicing or transporting the fan.
1). Cleaning and maintenance
1. Must wear eye protection. If not , the object may
get into your eyes which may hurt you.
2. Always take off battery pack and adaptor when
maintaining the product in order to refrain from the
injury.
3. Do not put the finger, sticks or other similar
objects into the fan in case of the injury or
product’s damage.
4. Never let chemicals touch the plastic parts. Or
else, the plastic parts will be damaged, causing
irreversible personal injury
5. Never try to damage any part of the battery pack
and keep it away from children. The battery should
be recycled and treated correctly.
Not obey the warning above, serious consequence
will be made, such as fire.
2). Storage
Store in a secure, dry place out of the reach of
children.
Do not place other objects on the product. Employ
only the same replacements for it may contribute
to the damage of product when using other
replacements.
Not recommend using the fan in the wet place
outside the door.
MAINTAIN BATTERY
CHARGER WITH CARE
Remove the plug from the socket before carrying
out any adjustment, servicing or maintenance.
Your battery charger requires no additional
lubrication or maintenance. Never use water or
chemical cleaners to clean your charger. Wipe
clean with a dry cloth. Always store your charger in
a dry place.
If the supply cord is damaged, it must be replaced
by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
Positec Australia Pty Limited
10 Corporate Blvd Bayswater , VIC 3153,Australia
ENVIRONMENTAL
PROTECTION
Waste electrical products must not be
disposed of with household waste. Please
recycle where facilities exist. Check with your
local authorities or retailer for recycling advice.