20V Cordless Jobsite Light
EN
7
3. TECHNICAL DATA
WX025L
WX025L.X**
Rated voltage
20V
Max***
Brightness
160/350 LM
Burntime
(2.0Ah)
High Brightness
7.5 hrs
Low Brightness
16.5hrs
Pivoting head
-6°~+90°
Machine weight
( bare tool)
0.57 lbs (0.26kg)
** X may be followed by one or two characters. All
models are the same except model number and
trademark.The suffix in models may be number from
“1” to “999” or English letter “A” to “Z” or “M1” to” M9”
which means different package or the various of
accessories packed in the package.
*** Voltage measured without workload. Initial
battery voltage reaches maximum of 20 volts.
Nominal voltage is 18 volts.
SUGGESTED BATTERIES AND
CHARGERS
Category
Type
Capacity
20V Battery
WA3575
2.0Ah
20V Charger
WA3881
2.0A
We recommend that you purchase your accessories
from the same store that sold you the tool. Refer to
the accessory packaging for further details. Store
personnel can assist you and offer advice.
4. OPERATING INSTRUCTIONS
NOTE:
Before using the tool, read the
instruction book carefully.
ACTION
FIGURE
BEFORE OPERATION
Charging the battery pack
See Fig.A
Installing/Removing the battery pack
SeeFig.B,C
OPERATION
Press the ON/OFF switch to turn the light
on and off.
WARNING
: Do not direct the light
beam into eyes.
See Fig.D1
Carrying or Hanging the Portable
Light
Utilize the hook to hang the light for
illumination.
Warning
! Do not hang the Work
light on any electrical power cord!
WARNING!
The hook is only used
to lift the light and is not intended
to bear any additional weight or
support your weight in any situation
See Fig.D2
Pivoting head adjusts light beam
towards working area at a range of -6
o
to 90
o
.
See Fig.E
5. MAINTENANCE
Your tool requires no additional lubrication or
maintenance. There are no user serviceable parts in
your tool. Never use water or chemical cleaners to
clean your tool. Wipe clean with a dry cloth. Always
store your tool in a dry place.
6. CLEANING
Use a dry clean cloth wipe the light and make sure
not to use water or immerse the light into water for
cleaning.
WARNING:
Never use solvents or other harsh
chemicals to clean the light. Never let any liquid
slide into the light.
