Worx Nitro WG330 Series, Руководство пользователя

Страница: 12 / 14

12
EN
Once activated, hold down Safety Trigger,
while simultaneously depressing the ON/
OFF Trigger to engage the blades.
A .If the blades are in the MAX cut opening,
the product will beep once and blades
keep the MAX cut opening;
B .If the blades are not in the MAX cut
opening, the product will beep once and
blades will reach the MAX cut opening.
See Fig.
G.H
PROGRESSIVE CUTTING
The blades will naturally return to the
open position when the ON/OFF Trigger is
released, while the blades will close once
pushed the ON/OFF Trigger. The degree of
blade’s closure will be controlled by the
degree of ON/OFF Trigger’s closure.
Note
:When the scissors can’t cut, the
product will beep once, then the scissors
return to the open state and stop working.
See Fig. I
EXCHANGE THE CUTTING SIZE
While product is active, depress the Safety
Trigger while simultaneously depressing
the ON/OFF Trigger. 2 seconds later, please
release the ON/OFF Trigger after hearing
a beep. Then the blades could exchange
cutting size between MAX cut opening and
small cut opening in order.
Note
: When the product is in the open
position, even if release both triggers,
the product will stay active for about one
minute.
Need to re-run the product-
Within one minute, firstly push the Safety
Lock trigger and later depress the
ON/OFF Trigger, then the product will get
re-activated to work. There will be a shear
interval for 20 seconds when release the ON/
OFF Trigger while depressing the Safety Lock
trigger. The product will be able to cut once
press the ON/OFF Trigger within 20 seconds.
Or else, the LED Light Indicator will go out
and the product will turn off
No need to re-run the product-
The product will be powered down if no
action within 1 minute.
See Fig. J
STORAGE MODE