Worldlawn WY 48FS481V, Руководство оператора, Страница: 5 / 12

4
Before Operating
Know your machine top to bottom.
Make certain all safety standards and
instructions have been fully read and
understood.
Be acquainted with all “SAFETY
INSTRUCTIONS” in this manual – to
start.
1. Fill the fuel tank and open the fuel valve.
2. Shift the transmission to neutral.
3. Blades engagement lever must be in the
“Off” position or back.
4. Thumb latches need to be in the “Neutral
Lock” position.
5. Choke the engine as required and start.
6. After engine is running, push blade
engagement lever forward to engage
blades.
7. Shift the transmission to the desired gear
(1 thru 4) for mowing, 5th gear is for
transport only.
8. Squeeze the control levers and push
forward on the thumb latches to unlock
the levers. Slowly release control levers
to engage the drive wheels.
9. In a normal mode the mower will travel in
a straight line. To turn; squeeze the drive
lever on the side in which you want to
turn.
10. To STOP forward motion, squeeze both
drive levers, lock thumb latches and shift
the transmission to neutral.
11. This unit is equipped with “Operator
Presence Controls” on the upper handle.
When the operator leaves the operator
position removing both hands from the
“Operator Presence Control” levers it will
cause the engine to shutdown.
THIS FEATURE IS FOR YOUR SAFETY!
WARNING:
FAILURE TO FOLLOW THE PREVIOUS
INSTRUCTIONS MAY RESULT IN
SEVERE BODILY INJURY OR
MECHANICAL FAILURE.
CAUTION:
Machine must be at a full “STOP” before
shifting from forward to reverse or from
reverse to forward. Failure to do so may
result in personal injury and/or damage
to the transmission.