Worldlawn KING COBRA WYK52FX801V5 Скачать руководство пользователя страница 37 | Manualshive

Страница: 37 / 48

Worldlawn KING COBRA WYK52FX801V5 Скачать руководство пользователя страница 37

37

MOTION CONTROL HANDLE ADJUSTMENT

Adjusting the height:

The motion control levers can be adjusted highter
or lower for maximum operator comfort.

1. Remove the two bolts holding the control lever

to the control arm shaft (A)

2. Move the control lever to the next set of holes

(B). Secure the lever with the two bolts.

3. Repeat the adjustment for the opposite control

lever.

Adjusting the Tilt

The motion control levers can be tilted fore or aft for
maximum operator comfort.

1. Loosen the upper bolt holding the control lever

to the control arm shaft.

2. Loosen the lower bolt just enough to pivot the

control lever fore or aft. Tighten both bolts to
secure the control in the new position.

3. Repeat the adjustment for the opposite control

lever.

Full Speed Adjustment

The full speed tracking can be adjusted using the
adjustment bolt (A) located on the front panel of
each motion control lever.

.

«
...
35
36
37
38
39
...
»

Содержание KING COBRA WYK52FX801V5

















































Отзывы:

Нет отзывов