HANGZHOU WORLDE BLUE WHALE MUSIC TECHNOLOGY CO.,LTD HANGZHOU WORLDE MUSIC ELECTRONIC CO., LTD
WEBSITE: WWW.WORLDE.COM.CN EMAIL:[email protected] TEL:86 571 88730848
- 13 -
5.1.3.2 Select the MIDI note number: Snare
Setting Pad 2 to trigger the snare is done the same way, only by choosing a different MIDI
note number (38 in this case):
So now you’re ready to lay down the groove for your song: You have Pads 1 and 2 set to
play the Kick and Snare, and Pads 7 and 8 set to Stop and Start the song.
5.1.4 Assign a Pad to toggle a MIDI CC # between two values
One popular musical effect these days is to take an audio loop, filter it heavily for certain
sections of a song, and switch it back to the full-open sound later in the song. You can
pre-configure one of the ORCA PAD 48 pads to send those commands to a filter plug-in
that should be readily available in your DAW software.
We’ll use Pad 6 for this example. Select it and then use the pull-down Mode menus to
select “Switched” and “Toggle”:
These settings will allow you to send two different values of a particular MIDI CC number
each time you press the pad.
