AUDEMAT DAB Probe 2.1.x User Manual – 06/2019
Page 10
WorldCast Systems SAS - 20, avenue Neil Armstrong – 33700 Merignac – Bordeaux Métropole (France)
+33 (0)5 57 928 928 –
[email protected] – www.worldcastsystems.com
3.
GETTING STARTED WITH THE AUDEMAT DAB PROBE
3.1.
Connecting to the network
See section 4.2 for the front panel application working principle.
Before connecting to the network, check the AUDEMAT DAB PROBE’s IP address:
From the main screen, touch the Check button to
display the menu.
Use the arrow to select the System menu and
touch the Check button.
The Network menu is selected, touch the Check
button
Use the arrow to select the Configuration menu
and touch the Check button.
If you need to change the IP address:
Use the Check button to switch to edit
mode
Use the Left and Right buttons to select
the various groups of digits
Use the Up and Down buttons or the
swipe around the wheel modify the
values
When the IP address has been modified,
use the Check button to save the new
value.
Proceed the same way to change the mask and gateway if necessary.
You may now connect the AUDEMAT DAB PROBE to the network on the ETH0 port using the provided Ethernet cable.
