Page 2
CONTENTS
SPECIFICATIONS ....................................................................2
UNPACKING.............................................................................3
CONNECTIONS........................................................................3
Power ....................................................................................3
Video .....................................................................................3
IN CASE OF DIFFICULTY ........................................................3
WARRANTY..............................................................................4
RETURNS.................................................................................4
Rev 0 09-30-1998, Reviewed 07-07-2015
SPECIFICATIONS
Input level
1.0 Vpp Composite, 75 Ω
Output level
Same as respective inputs
"
2% into 75 Ω
Connectors
VDA206
4 pin mini-DIN female (std. S-Video conn.)
Bandwidth
Greater than 30Mhz
Temperature
Operating
0
E
-
40
E
C (32
E
-
104
E
F)
Storage
-40
E
-
60
E
C (-40
E
-
140
E
F)
Humidity
Operating
10%
-
90% (non-condensing)
Storage
5%
-
95% (non-condensing)
Power
Voltage
110
-
125VAC, 50/60Hz
(+12VDC & 230VAC available, contact factory)
Consumption
12W
Size
8.6" (W) x 6.7" (D) x 2.4" (H)
218.5 mm (W) x 170 mm (D) x 61 mm (H)
Weight
1 lb, 15 oz.
Manufactured in USA by MicroImage Video Systems
Page 3
UNPACKING
The VDA206 package includes the following items:
VDA206 Video Distribution Amplifier
CAB05006 Power Cord
This operation manual
Please inspect all items carefully and report damaged or missing
items to your dealer or MicroImage Video Systems.
CONNECTIONS
Power
The VDA206 uses an industry standard, detachable 3 wire power
cord which is included with the unit. For medical applications, a
special low leakage cord (part # CAB01006) is available. Connect
the cord to a suitable power source of 120VAC, 50-60Hz.
Video
Connect the video source (i.e. camera) to the IN connector on the
VDA unit. Connect the OUTPUT signals from the VDA unit to the
video displays as required. Each output can only have a single 75
ohm termination.
The VDA206 uses industry standard mini-DIN connectors for
S-Video.
IN CASE OF DIFFICULTY
If you are experiencing problems with any MicroImage product,
you can contact MicroImage Support using the following methods:
Phone
610-754-6800
Fax
610-754-9766
Web
www.mivs.com
