Assembly Steps
Step 1
-
Lay the Bench Top (A) upside down on a non-marring surface (packing foam).
-
Align holes on the Leg (B) with corresponding holes on the corner of Bench Top (A).
-
Secure each Leg (B) using 1 Hex Bolt (H-1), Spring Washer (H-3) and Flat Washer (H-2), stacking the
hardware in the order as illustrated. Repeat the process for the other Leg (B).
-
Engage all bolts by hand first, then fully tighten all Hex Bolts (H-1) with the supplied Wrench (T-1).
-
Using a second person to assist you, carefully turn the table assembly upright.
Step 2
-
Check that all bolts have been fully tightened. Assembly is now complete and the product is ready for use.
-
NOTE: Levelers on the bottom of Legs (B) can be used for additional adjustment if needed.
Page 4
TOP
ADJUSTABLE
LEVELERS
(H-1) Bolt x 4
(H-3) Spring Washer x 4
(H-2) Flat Washer x 4
H1
H2
A
B
T1
H3
TOP
