A
B
Front
H-3
x2
H-6
H-4
H-5
A
B
Assembly Steps
Step 1
Page 4
Step 2
(H-1) PHILLIPS SCREW x2
(T-1) PHILLIPS SCREW DRIVER x1
- Place Backrest (A) upside down on a padded non - marring surface.
- Install Seat (B) using Allen Bolts (H-3) and using Spring Washers (H-4), Flat Washers (H-5) and
Allen Key (H-6).
- Front of seat has a prole shape as shown above.
- Repeat for other side. Do not fully tighten at this point.
- Place Right Armrest (C2) and Left Armrest (C1) upside down on a padded non - marring surface.
- Install Right Front Leg (D2) to Right Armrest (C2), Left Front Leg (D1) to Left Armrest (C1)
using Phillips Screws (H-1)
Ensure they are fully tightened.
and Phillips Screw Driver (T-1).
(H-3) ALLEN BOLT 6x65 x4
(H-4) SPRING WASHER x4
(H-5) FLAT WASHER x4
(H-6) ALLEN KEY x1
D1
D2
C2
H-1
C1
H-1
T-1
