Assembly Steps
Step 1
z
z
-
Lay the Long Leg (B) and Short Leg (C) on a non-marring surface (packing foam).
-
Align holes on the Short Leg (C) with corresponding holes on the Long Leg (B).
-
Secure each Leg (B and C) using 4 Allen Bolts (H-1). Repeat the process for the other Leg.
-
Engage all bolts by hand first, then fully tighten all Allen Bolts (H-1) with the supplied Allen Key (T-1).
-
Using a second person to assist you, carefully turn the leg assembly upright.
Step 2
-
Lay the Top Media TV Stand (A) upside down on a non-marring surface (packing foam).
-
Lay the Top Table (A) upside down on a non-marring surface (packing foam).
-
Align holes on the
bracket
Leg (B and C)
with corresponding holes on the bottom of Top Table (A).
-
Secure each Leg (B and C) using 4 Allen Bolts (H-1).
-
Engage all bolts by hand first, then fully tighten all Allen Bolts (H-1) with the supplied Allen Key (T-1).
-
Using a second person to assist you, carefully turn the table assembly upright.
Page 4
(H-1) Allen Bolt x8
H1
B
T1
C
(H-1) Allen Bolt x4
H1
T1
A
TOP
TOP
