FRONT
TOP
TOP
FRONT
Using a second person to assist you, align the holes on Support Leg (F) with the corresponding
pre-drilled holes on the underside of Seat Frame (A) as shown. Each Support Leg (F) is secured
using 2 Short Allen Screws (H-3). Engage both screws and then
FULLY TIGHTEN
using Allen
Key (H-4).
FULLY TIGHTEN all allen bolts and allen screws from Steps 1-5 at this time using
Allen Key (H-4).
Using a second person to assist you, carefully turn the assembly upright. Ensure that all
bolts have been fully tightened.
Assembly Steps
Step 5
Step 6
(H-4) Allen key x1
(H-3)
Short Allen Screw x 4
H-3
H-4
F
F
Page 6
