Rev 01 - April 12, 2017
Assembly Steps
Step 1
Page 4
On a non-marring surface, position and secure Center Legs (I) to Bottom Frame (G) by using
screwing Center Legs (I).
Step 2
On a non-marring surface, position and secure Left Side Frame (C1), Right Side Frame (C2), Left
Divider Frame (B1) and Right Divider Frame (B2) to Bottom Frame (G) with Flat Washers (H-4),
Lock Washers (H-3) and Long Allen Bolts (H-2) by using the Allen Key (T-1).
Then, use the Straight Wood Bar (T-3) as a tool to check the distance between dividers.
Last, use the provided 90° Triangle (T-2) and adjust the corners to make sure the Side Frames
and Dividers are square. Fully tighten Allen Bolts.
C2
C1
B1
G
T-1
H-2
H-3
H-4
8x
T
ria
n
g
le
Triangle
90°
T-2
I
3x
G
I
B2
T-3
