Step 1
Step 2
(H-3) Short Allen Bolt x 3
(H-4) Lock Washer x 7
(H-5) Flat Washer x 7
(T) Allen Key x 1
(H-1) Long Allen Bolt x 4
Page 5
H-4
H-5
H-1
H-3
H-4
H-5
T
4x
3x
FRONT
TOP
T
H-2
H-4
4x
TOP
FRONT
H-5
T
(H-2) Medium Allen Bolt x 4
(H-4) Lock Washer x 4
(H-5) Flat Washer x 4
(T) Allen Key x 1
Assembly Steps
Place Back Frame (A) down onto a padded, non-marring surface as shown. Attach Seat Frame (B) to Back Frame (A)
at the seat corners using Long Allen Bolts (H-1), Lock Washers (H-4) and Flat Washers (H-5), stacking the hardware
in the order as shown. Engage all bolts first by hand, then fully tighten using Allen Key (T). Continue by securing the
middle of Seat Frame (B) to the Back Frame using Short Allen Bolts (H-3), Lock Washers (H-4) and Flat Washers
(H-5), stacking the hardware in the order as shown. Fully tighten using Allen key (T). Do not over tighten.
Place the assembled Backrest/Seat upside down on a padded, non-marring surface as shown. Secure Front Legs (C)
to the corners of Seat Frame (B) using Medium Allen Bolts (H-2), Lock Washers (H-4) and Flat Washers (H-5),
stacking the hardware in the order as shown. Engage all bolts first by hand, then fully tighten using Allen Key (T).
Do not over tighten.
