Page 5
-
Lay the Table
Top
(A) upside down on a non-marring surface (packing foam).
-
Align holes on the
bracket
Leg (B-C)
with corresponding holes on the bottom of Table Top (A).
-
Secure each Leg (B-C) using 3 Allen Bolts (H-2), Spring Washers (H-4) and Flat Washers (H-3), stacking the
hardware in the order as illustrated. Repeat the process for the other Leg (B-C).
-
Engage all bolts by hand first, then fully tighten all Allen Bolts (H-1&H-2) with the supplied Allen Key (T-1).
-
Using a second person to assist you, carefully turn the table assembly upright.
Step 3
-
Check that all bolts have been fully tightened. Assembly is now complete and the product is ready for use.
-
NOTE: Levelers on the bottom of both Legs (B-C) can be used for additional adjustment if needed.
TOP
ADJUSTABLE
LEVELERS
