STEP -1
Align
Bottom Pipe
o
nto
Mounting Back Plate (A) and
rotate clockwise until secured.
Wall
wall plug (H-1)
Measure distance between keyholes
given
on the
Mounting
Back Plate (A)
. M
ark location of holes on the
wall a
s
desired. Pre-drill holes with a Drill Machine (Not
included). Insert Wall Plugs (H-1) into pre-dilled holes.
STEP -2
STEP - 1
Bottom
Pipe
Mounting Back
Plate (A)
Screw (H-2)
Wall
Wall Plug
(H-1)
STEP -3
Align Screw (H-2) over Wall Plugs (H-1) and tighten with
Phillips Screwdriver (T-1)
(Not included)
. Do not fully
tighten screws,
l
eave 1/4” screws protruding from
the wall.
STEP -4
Align Wall Sconce over protruded Screws (H-2) and pull
the Wall Sconce down until screw tucked
into the
hardware.
STEP - 2
STEP - 3
STEP - 4
Phillips Screwdriver (T-1)
Page-3
Assembly Steps
Wall