World Market Avila 602536, Руководство по сборке

Страница: 5 / 8

Page 5
Assembly Steps
STEP 1
:
Attaching Bottom Stretcher
H-1 Spring Washer (
∅
13xM8) x 2
H-5
H-3
Connector Plate x 2
Short Allen Bolt (M6x45) x 2
H-4 Screws (
∅
6 x 3/4 Inch) x 6
D
B
T-1
T-2
H-5
H-4
H-1
STEP 2
:
Assembling Bottom Stretcher
B
D
B
B
2X
Using a second person to assist you, place both Leg Posts (B) upside down onto a padded, non-marring surface
as shown. Insert Bottom Stretcher (D) into the corresponding notched hole in the bottom of Leg Post (B) .
Align Connector Plate (H-3) with the corresponding pre-drilled holes on the bottom of each Leg Base (B) as shown.
Start by securing the middle hole of the Connector Plate (H-3) which will also secure the Bottom Stretcher (D) using
Short Allen Bolts (H-5) and Spring Washers (H-1). Engage the bolts by hand, but do not fully tighten them yet.
Next, finish securing Connector Plate (H-3) using Screws (H-4) and a Phillips head screwdriver (not include). Fully
tighten all screws at this time using a Phillips head screwdriver. Then Fully tighten Short Allen bolts ( H-5) using
Allen Key ( T-1)
TOP
TOP
H-3