World Market Avila 602534, Руководство по сборке

Страница: 5 / 8

Page 5
Assembly Steps
STEP 1
:
Attaching Foot Leg
H-1
H-2
Spring Washer (
∅
13xM8) x 8
Flat Washer (
∅
17x M8) x 8
H-7 Long Allen Bolt (M6 x 100) x 8
H-7
H-1
H-2
T-1
D
F
2X
STEP 2
:
Attaching Stretcher
H-1
Spring Washer (
∅
13xM8) x 2
H-6
H-3 Connector Plate x 2
Medium Allen Bolt (M6x70) x 2
H-4 Screws (
∅
6 x 3/4 Inch) x 6
F
F
E
T-1
T-2
H-6
H-4
H-1
2X
TOP
Attach Leg Base (F) to Leg Post (D) using Long Allen Bolts (H-7), Spring Washer (H-1) and Flat Washer (H-2),
Stacking the hardware in the order as shown . Engage all bolts by hand first, then fully tighten using Allen Key
(T-1). Repeat this step for the second Leg (D/F) assembly.
TOP
Using a second person to assist you, insert Stretcher (E) into the corresponding notched hole at each Leg Base (F)
assembly as shown. Align Connector Plate (H-3) with the corresponding pre-drilled holes on the bottom of each Leg
Base (F) as shown. Start by securing the middle hole of the Connector Plate ( H-3) which will also secure the Stretcher
(E) using Medium Allen Bolts (H-6) and Spring Washers (H-1). Engage the bolts by hand, but do not fully tighten them
yet. Next, finish securing Connector Plate (H-3) using Screws (H-4) and a Phillips head screwdriver (not included).
Fully tighten all bolts and screws at this time using Allen Key (T-1) and a Phillips head screwdriver.