Assembly Steps
Step-2
Assembled view
Page 4
Wall
T-3
H-1
Wall
anchor
Wall
anchor
Wall
anchor
Wall
anchor
A
A
H-2
H-2
T-3
H-2
A
A
H-2
Insert
wall plug
(H-1) if you are mounting on a dry wall.
Insert
screw
(H-2)
into wall plug (H-1) as shown above in the
drawing
.
Leave
1/4
"
of the screw (H-2)
out of the wall as shown above in drawing.
Align keyhole over screw (H-2) and
pull down ledge until secured. Insert screws (H-2) at lower ends and fully tighten connections with screw driver (T-3).
Note - Bracket set is meant to be used with World Market shelves sold separately.
Maximum Load - 50 lbs
Wall
T-3
H-2
Screw
H-2
Screw
