Clean with a mild solution of Ivory liquid soap and lukewarm water, using a soft cloth. Use
of Pledge furniture polish (NOT lemon-scented)
will extend the life of flexible clear vinyl
and prevent shrinkage. If scratched, use a product made for clear acrylic scratch removal.
Use of automotive products such as Armorall may permanently
cloud the surface.
INTERIOR CUSHIONS
Brush and/or vacuum to remove loose dirt. Heavier accumulations
may be removed with a
mild solution of WOOLIte and lukewarm water, applying the foam only with a soft brush.
Remove dirt by wiping lightly with a dry cotton towel. Allow thorough AIR DRYING before
placing cushions back in the cabin.
VINYL CUSHIONS
Regular washing with a solution of water and Ivory liquid as part of general boat care is
recommended.
Exterior cushions are closed-cell foam, which will not absorb water. Use a
protective product specifically formulated for marine vinyl to provide UV protection.
Use of
automotive products such as Armorall may deteriorate surfaces and shorten fabric life.
FRESH WATER TANK
Cleaning or deodorizing the fresh water tank may be accomplished
by filling the tank with
a 5% solution of household bleach and water after draining the contents of the tank. Add
approximately
10 gal. water, then add 1 gal. bleach -- fill the remainder of the tank with
water. Let stand for several hours. Drain the tank, refill and drain repeatedly until all
chlorine odor is removed.
WINTERIZATION/LAY
-UP
Refer to the motor manufacturer's manual for storage instructions.
Drain all fresh and raw
water tanks. Remove batteries and store in a dry cool area (not on a cement surface);
maintain charge levels with a trickle-charger.
Drain fuel tanks, or fill completely as per
local practice or regulation. If full tanks are stored for more than 30 days, it is
recommended that a fuel stabilizer be added to prevent degradation.
Remove all personal
items and portable electronics. Wash the boat thoroughly with a solution of fresh water
and Ivory liquid and apply a coat of marine paste wax. If covering, provide some means of
ventilation to prevent moisture and/or heat damage.
BOTTOM PAINTING
If your WORLD CAT is to be left in the water for extended periods, it is recommended that
an application of a high-quality bottom paint be applied to protect against marine growth
and deteriorated performance. Follow all manufacturer's
precautions regarding the use of
personal protective equipment, etc. Hint: To establish the waterline for masking, put the
boat in the water for a few days to establish a "scum line" and mask off accordingly.
Prepare the hulls by removal of mold release waxes, wiping down the surfaces with a pre-
primer solvent; change application and removal rags frequently. Scratch the surfaces
lightly with a Scotch-Brite pad to provide a footing for the primer coat. Wipe lightly with
solvent once again. Apply an epoxy barrier prime coat(s) per the manufacturer's
instructions. Apply the final coat(s) of bottom paint and re-Iaunch per instructions.
7
