WORLD-CCTV 722RIII-IP, Руководство пользователя

Страница: 89 / 95

Page 89 of 95
Start Menu:
After type the numeric key “ 95 ” + “ CALL ” to start OSD menu.
2. Preset
Function:
Up to 127 positions can be set. Besides No 95, all presets can be named as 1-128. With the
combination of preset key and number key of controller, the preset point setup and call
back function can be quickly operated. And modify the default preset information. (preset
label, dwell time
… )
Setup of Preset Point:
Select the desired camera to adjust to the state of given position. T
hen input preset No.,
press PRESET , and the dome will save current horizontal angle and title angle of pan/Tilt,
Zoom and position parameters into the memory.
Preset Point Call Back:
Input wanted preset number (default is 1), input “ call ” , then the preset point can be called
back.
Preset Deletion:
Please use the preset OSD menu to delete preset, or just setup another preset with the same
number to cover the old preset point.
3. Swing
Function: Through the application of swing function, the camera can move automatically
between 2 preset points repeatedly.
Swing Setup: Please check the OSD menu of swing function to set.
Swing Running: Put 141 or 148 number, then in “ call ” .
Swing Deletion: Please check the OSD menu of swing function to delete.
4. Pattern
Function: The pattern function enables us to save and play camera motions created by
joystick. Max. 9 patterns can be used and can be recorded during max. 1 min for a pattern.
Pattern Setup: Pattern can be created by using OSD Menu to Establish Pattern:
Pattern Running: Input numeric 131 or 139then input “ call ” to run one pattern.
Pattern Deletion: Please use OSD menu to delete pattern.
5. Group
Function: The group function allows running up to 32 groups of preset, swing, pattern in
sequence. Every group including preset, swing, pattern, but the total function number can ’ t
be more than16 pieces. Through dwell time which be set with swing function still workable
when group function is working.