6
WOT-280
www.servotool.eu
0203-5142281
GB
1800-719901
IRL
aFTEr SalES SuPPOrT
WOT-280
www.servotool.eu
0203-5142281
GB
1800-719901
IRL
aFTEr SalES SuPPOrT
was designed.
b. Do not use the power tool if the switch does not turn it on and off. Any power tool
that cannot be controlled with the switch is dangerous and must be repaired.
c. Disconnect the plug from the power source before making any adjustments,
changing accessories, or storing power tools. Such preventive safety measures
reduce the risk of starting the power tool accidentally.
d. Store idle power tools out of the reach of children.3 This appliance is not intended
for use by persons (including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning the use of the appliance by a person
responsible for their safety.
e. Maintain power tools. Check for misalignment or binding of moving parts,
breakage of parts and any other condition that may affect the power tools
operation. If damaged, have the power tool repaired before use. Many accidents
are caused by poorly maintained power tools.
f. Use the power tool, accessories and tool bits etc., in accordance with these
instructions and in the manner intended for the particular type of power tool,
taking into account the working conditions and the work to be performed.
g. Damaged switches must be replaced at a customer service repair centre. Do not
use power tools that cannot be switched on and off.
h. Do not leave power tools unattended while they are switched on. Always switch
off the tool and wait until it has come to a full standstill before leaving.
i. If the mains cable has been damaged, it must be replaced by a suitably qualified
person with a special mains cable. These can be obtained from the manufacturer
or the manufacturer’s customer service department.
5) Service
a. Please use a qualified expert who uses original replacement parts to repair your
power tool.
b. Caution! The use of any accessories or additional tools other than those
recommended in this manual may lead to an increased risk of injury and may
invalidate your warranty. Only use original replacement parts.
Additional safety instructions.
•
Compare the maximum number of revolutions allowed for any accessories you
intend to fit with the number of revolutions of the machine.
•
When you put the machine away it must be switched off and moving parts must
have reached a standstill.
•
Never attach an assembly spanner to your machine with a piece of string or
anything similar.
•
Do not use sandpaper intended for larger sanding pads. Larger sandpaper will
extend beyond the sanding pad causing snagging, tearing of the paper or kick-
back. Extra paper extending beyond the sanding pad can also cause serious
lacerations.
OTM6016 Ma UK 1206-18.indd 6
6/18/12 11:25 AM
