Workzone Titanium+ AG36, Инструкция по эксплуатации

Страница: 28 / 36

28
28
AFTER SALES SUPPORT
1300 889 028 (toll free)
e-mail:
MODEL No.:
info.aldi@positecgroup.com
AG36 • 8290 • 06/2019
13. FAQ/Troubleshooting
Working hints for your angle grinder
1) Always start at no load to achieve maximum speed then start
working.
2) Do not force the disc to work faster; reducing the disc’s moving
speed means longer working time.
3) Always work with a 15-30 degrees between disc and workpiece.
Larger angles will cut ridges into the workpiece and affect the
surface finish. Move the angle grinder across and back and forth
over the workpiece.
4) When using a cutting disc never change the cutting angle
otherwise you will stall the disc and angle grinder motor or break
the disc. When cutting, only cut in the opposite direction to the
disc rotation. If you cut in the same direction as the disc rotation
the disc may push itself out of the cut slot.
5) When using a diamond disc it will become very hot. If this
happens you will see a full ring of sparks around the rotating disc.
Stop cutting and allow to cool at no load speed for 2-3 minute