19
Operation
OPERATION
WARNING!
Wear suitable clothing, ear and eye protection when working with
the equipment. Ensure that the equipment is functional before
each use. Ensure that the mains voltage value matches the label
on the equipment. Check the safe condition of the machine:
− Check for visual defects.
− Check that all parts of the machine have been securely fitted.
− Check that the water connector and the high-pressure pipes
are tight.
Starting and stopping
Note: Position the high pressure washer on an area of flat ground.
Stand in a secure and stable position.
Starting:
1. Open the water inlet valve Press the safety button on the spray
gun and press the trigger until there is a steady stream of
water. (
FIG 11)
2. To switch the machine on, set the ON (1)/OFF (0) switch to ON (1)
(
FIG 12).
Stopping:
3. For short breaks, release the trigger (
FIG 13). The machine will
stop but will remain pressurised.
4. For longer breaks or stowing away the device, set the ON (1)/
OFF (0) switch to OFF (0) (
FIG 9) and unplug the power supply
5. Close the water supply.
Before disconnecting any water connection, press the trigger
to release the pressure.
