Workzone PT15101201, Руководство пользователя

Страница: 18 / 32

Use
18
www.coreservice.co.uk
AFTER SALES SUPPORT
18
GB IRE
GB
0190 4727501
IRE
0190 22605
Connecting and disconnecting the pneumatic gun
CAUTION!
Risk of injury!
If the compressed air hose with the quick coupling recoils uncontrollably when
it is disconnected from the pneumatic gun, it could thrash around and you could
injure yourself.
− Firmly hold the quick coupling in your hand when disconnecting it from
the pneumatic gun.
Connecting the pneumatic gun
Before operating the compressor, you must attach the pneumatic gun with the ma-
nometer and, if necessary, an adapter nozzle. To do so, proceed as follows:
1. Make sure that the compressor has been switched off.
2. Insert the compressed air connector plug
14
of the pneumatic gun
15
in the
quick coupling 3 until it audibly locks into place (see fig. B).
The sleeve of the quick coupling will automatically spring forward.
3. If you like, fit the nozzle adapter 8 and one of the enclosed adapters on the
quick-release with lever 19 as described in the chapter “Inflating”.
You can now switch the compressor on as described in the chapter “Switching the
compressor on and off”.
Disconnecting the pneumatic gun
1. Make sure that the compressor has been switched off.
2. Pull the sleeve on the quick coupling 3 of the compressed air hose 2 back
(see fig. A).
3. Pull the pneumatic gun 15 off.
Switching the compressor on and off
1. Place or lay the compressor on a suitable work surface.
2. Make sure that the On/Off switch 1 is set to the “0” position (see fig. A).
3. Connect the pneumatic gun 15 and any other accessories to the compressor as
described in the chapter “Connecting the pneumatic gun”.
4. Insert the mains plug in a socket.
5. To switch the compressor on, set the On/Off switch to the “1” position.
You can read the work pressure on the manometer
7
.