7
2
Check the parts supplied
Parts list and assembly
Unpack the tool carefully and check that the following parts are present:
•
Multifunction tool
•
Plunge saw blade
•
Segment saw blade
•
20 sanding sheets (grit: 60/240 four sheets of each + grit: 80/120/180/320 three sheets of each)
•
Sanding pad
•
Scraper
•
Clamping screw and washer (pre-assembled)
•
Allen key
•
Two extraction connectors
•
Extraction hose
•
Additional handle
•
Operating instructions
Please contact your dealer if any parts are missing or damaged.
ENGLISH
CGN300A / 90810
After Sales Support
0845 872 2740
GB
019022605
IRL
www.coreservice.co.uk
Never put the power tool down until the attachment has come to a halt.
The rotating
attachment can contact the surface which would make you lose control over the
power tool.
Hold the power tool firmly and position your arms and body such that you can absorb
kickback forces.
Always use the additional handle so that you have the greatest
possible control over the power tool.
Use only sandpaper approved for your power tool.
Unsuitable or projecting sandpaper can cause injuries.
Do not modify the power tool in any way.
The use of accessories other than those
supplied can lead to damage to the tool and injury of the user.
Protect your furniture and floors with suitable covers when you are using the power
tool in your home.
Always observe the general rules for the prevention of fires when you are using certain
power tools in your house or in the workshop.
We recommend that you have a fire
extinguisher to hand at all times while you are working.
Use only original spare parts for servicing and follow the instructions in the "Servicing"
section of these instructions.
The use of non-authorized parts or the failure to observe
the maintenance instructions can lead to electric shocks or injuries.
