4
1866 902 9690
AFTER SALES SUPPORT
Cordless Reciprocating Saw · 20V Lithium-Ion Battery
●
Do not overreach. Keep proper footing and balance at all times. This enables better control
of the power tool in unexpected situations.
●
Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves
away from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts.
●
If devices are provided for the connection of dust extraction and collection facilities, en-
sure these are connected and properly used. Use of these devices can reduce dust-related
hazards.
●
Only use safety equipment that has been approved by an appropriate standards agency.
Unapproved safety equipment may not provide adequate protection. Eye protection must
be ANSI-approved and breathing protection must be NIOSH-approved for the specific
hazards in the work area.
Power tool use and care
●
Do not force the power tool. Use the correct power tool for your application. The correct
power tool will do the job better and safer at the rate for which it was designed.
●
Do not use the power tool if the switch does not turn it on and off.
Any power tool that cannot be controlled with the switch is dangerous and must be re-
paired.
●
Disconnect the battery pack from the power tool before making any adjustments, chang-
ing accessories, or storing power tools.
Such preventive safety measures reduce the risk of starting the power tool accidentally.
●
Store idle power tools out of the reach of children and do not allow persons unfamiliar
with the power tool or these instructions to operate the power tool. Power tools are dan-
gerous in the hands of untrained users.
●
Maintain power tools. Check for misalignment or binding of moving parts, breakage of
parts and any other condition that may affect the power tool’s operation. If damaged,
have the power tool repaired before use. Many accidents are caused by poorly maintained
power tools.
●
Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to control.
●
Use the power tool, accessories and tool bits etc. in accordance with these instructions,
taking into account the working conditions and the work to be performed. Use of the pow-
er tool for operations different from those intended could result in a hazardous situation..
Battery tool use and care
●
Recharge only with the charger specified by the manufacturer. A charger that is suitable
Safety Instructions
