Air Compressor
AFTER SALES SUPPORT
(toll free)
MODEL No.: PAP110 • 02/2019 63569
e-mail: [email protected]
AUS
11
1300 889 028
AUS
Operating Instructions
Operating Instructions
WARNING!
Do not use the machine in high temperature and
high humidity environment.
1. Connect the power plug to the main power supply and turn on.
2. To switch on the air compressor, press the “I” on the ON/OFF switch
(3).
3. To switch off the air compressor, press the “O” on the ON/OFF switch
(3), and then disconnect the power plug from the mains power supply.
(See Fig F)
4. Run the attached air tool until no compressed air remains in the hose,
by pushing in the vent valve (7).
2. Using the air gun with pressure gauge (6)
The air gun with pressure gauge (6) is used to inflate car tyres. With the
corresponding accessories it can also be used to inflate and regulate
bicycle tyres, inflatable dinghies, air mattresses, balls etc. (See Fig. G, H,
I)
Pressure can be released by pushing in the vent valve (7) .
- Pumping up balls with the help of the ball inflating needle (18).
- The valve adapter (16) enables bicycle tyres to be inflated.
NOTE:
After the air nozzle is connected, rotate it 1 or 2 turns clockwise
to ensure that it does not leak. (See Fig. J)
F
Operation
1. ON/OFF switch (See Fig. F)
NOTE:
It is recommended to use in conjunction
with this appliance a Residual Current Device
(RCD) of rating not exceeding 30mA.
NOTE:
There will be a buzz after the air
compressor starts, and there will be automatic
pressure relief after the safety air pressure is
reached (the machine has a deflated sound).
This is normal.
NOTE:
Turn off the machine without operation. Long idle conditions
can affect machine life.
