Worksite 241-9870 Скачать руководство пользователя страница 2

2

IMPORTANT  SAFETY  INSTRUCTIONS

WARNING

:

When using electric tools, machines or equipment, basic safety 

precautions should always be followed to reduce the risk of fire, electric 

shock, and personal injury.

READ

ALL

INSTRUCTIONS BEFORE USING THIS TOOL

1. KEEP WORK AREA CLEAN. 

Cluttered areas can cause injuries.

2. CONSIDER WORK AREA ENVIRONMENT. 

Don’t use power tools in damp, 

wet, or poorly lit locations. Don’t expose tools to the rain. Keep the work area 

well lit. Don’t use tools in the presence of flammable gases or liquids.

3. KEEP CHILDREN AND BYSTANDERS AWAY.

 

All children should be kept 

away from the work area. Don’t let them handle machines, tools or extension 

cords.

Bystanders can be a distraction and can be injured.

4. GROUNDED TOOLS

 must be plugged into an outlet that is properly 

installed and grounded.  Grounding provides a low-resistance path to carry 

electricity to the ground away from the operator, should the tool malfunction elec-

-

trically

.   Do not remove the grounding prong from the plug or alter the plug in 

any way

.  If in doubt as to whether the outlet is properly grounded according 

to code, check with a qualified electrician. 

5. OBSERVE PROPER PRECAUTIONS REGARDING DOUBLE INSULA-

TION.

This tool is double insulated.   It is equipped with a polarized plug.  

One blade is wider than the othe

r

, so it will fit into a polarized outlet only one 

way

.  If you have difficulty inserting the plug, try reversing it.  If it still doesn’t 

fit , do not alter the plug; have a qualified electrician install a polarized outlet.

6. GUARD AGAINST ELECTRIC SHOCK. 

Prevent body contact with grounded 

surfaces: pipes, radiators, ranges, and refrigerator enclosures. When your 

body is grounded the risk of electric shock increases.  When working wher-

ever “live” electrical wires may be encountered, try to ascertain whether 

there is a danger of shock. DO NOT TOUCH ANY METAL PARTS 

OF 

THE

 TOO

L while using it. Hold the tool only by the plastic grip to prevent 

electric shock if you contact a live wire.

7. DO NOT MISUSE THE CORD.

  Never carry your tools by the cord or pull on 

the cord to unplug it.  Protect the cord from potential sources of damage: 

heat, oil & solvents, sharp edges, or moving parts.  Replace damaged cords 

immediately. 

8. WHEN WORKING OUTDOORS, USE AN OUTDOOR-RATED EXTENSION 

CORD.

An extension cord rated for outdoor use must be marked “W-A” or 

“W”.

9. DO NOT EXPOSE ELECTRICAL POWER TOOLS TO MOISTURE.  

Rain or 

wet conditions can cause water to enter the tool and lead to electric shock.

10. ENSURE THE EXTENSION CORD YOU USE IS OF SUFFICIENT GAUGE 

FOR ITS LENGTH.

11. STORE IDLE EQUIPMENT. 

Store equipment in a dry area to inhibit rust. 

Equipment also should be in a high location or locked up to keep out of 

reach of children.

12. DON’T FORCE THE TOOL.  

It

will do the job better and more safely at the 

rate for which it was intended.

13. USE THE RIGHT TOOL. 

Don’t force a small tool or attachment to do the 

work of a larger industrial tool. Don’t use a tool for a purpose for which it was 

not intended.

14. DRESS PROPERLY. 

Don’t wear loose clothing or jewelry; they can be 

caught in moving parts. Protective, non-electrically conductive gloves, protective

eyewear and non-skid footwear are recommended. Wear protective hair  

covering to contain long hair and keep yourself from harm.

Recommended Minimum Wire Gauge for Extension Cords

Amps from Tool Nameplate 25’ length

50’ length

75’ length

100’ length 150’ length 200’ length

0-5 amps 

 

16 ga.

 

16 ga.

 

16 ga.

 

14 ga.

 

12 ga.

 

12 ga.

5.1-8 amps

 

16 ga.

 

16 ga.

 

14 ga.

 

12 ga.

 

10 ga.

 

Do Not Use

 

8.1-12 amps

 

14 ga.

 

14 ga.

 

12 ga.

 

10 ga.

 

Do Not Use

 

Do Not Use

 

12.1-15 amps

 

12 ga.

 

12 ga.

 

10 ga.

 

10 ga.

 

Do Not Use

 

Do Not Use

 

15.1-20 amps

 

 

10 ga.

 

10 ga.

 

10 ga.

 

Do Not Use

 

Do Not Use

 

Do Not Use

 

Содержание 241-9870












Отзывы: