Worksaver SS-590 Скачать руководство пользователя страница 11

10

SAFETY INSTRUCTIONS 

(continued)

Comply with state and local laws governing highway safety and movement of machinery on public roads.

Always be sure the attachment is in the proper slightly raised position for transport.

Plan your route to avoid heavy traffic.

Do not drink and drive!

Never allow riders on either power unit or attachment. Falling off can kill.

The use of flashing amber lights is acceptable in most localities. However, some localities prohibit their use.
Local laws should be checked for all highway lighting and marking requirements.

Reduce speed when transporting mounted attachments to avoid bouncing and momentary loss of steering
control.

Be a safe and courteous driver. Always yield to oncoming traffic in all situations, including narrow bridges, inter-
sections, etc.

TRANSPORT SAFETY

Store the unit in an area away from human activity. Do not permit children to play on or around the stored unit.

If blocking is used, make sure it is solid and secure before leaving area.

STORAGE SAFETY

Make sure all parked machines are on a hard, level surface and engage all safety devices. Storage location
should be level and solid to make connecting and unconnecting to skid steer easy.

Содержание SS-590























Отзывы: