Worksaver HPD-16 HSS, Руководство владельца и оператора, Страница: 8 / 42

7
SAFETY INSTRUCTIONS
(continued)
OPERATIONAL SAFETY (continued)
Check that this attachment is securely mounted to the loader. Failure to install lock pins or have the latching
mechanism engage could result in injury or death.
Do not allow children or others to ride on the power unit with an operator. Riders are subject to injury such as
being struck by foreign objects or being thrown off. Riders obstruct the operator’s view resulting in unsafe oper-
ation.
Never allow anyone to ride on the implement!
For operator safety, always keep load in front of power unit. NEVER position load back over operator. ALWAYS
BE CAREFUL!
Keep alert and watch the rear as well as the front when working with the loader.
Beware of low electrical wires when loader is raised. Serious injury or death can result if contact is made.
Operate loader from operator’s seat only. Remain at controls until operating cycle is complete.
Do not walk or work under a raised driver ram unless it is securely blocked or held in position. Do not depend
on the hydraulic system to hold the driver ram in place.
Never leave post driver ram in the raised position. Always lower ram to the ground or to the transport position
and install the transport lock pin before transporting or storing.
A heavy load can cause instability of the skid steer unit. Use extreme care during travel. Slow down on turns
and watch out for bumps.
Observe safety recommendations in loader instruction manual. Always use care when operating a post driver.
Carry the post driver slowly and as low as possible to the ground. Avoid excessive speed during operation.
Always shut off power unit and shift to “Park” or set brakes when leaving unit. Always lower bucket or
attachment to ground, relieve all hydraulic pressure. Remove key when leaving equipment unattended. Park in
level area.