Worksaver GBH-2072R Скачать руководство пользователя страница 1

Страница: 1 / 32

CAUTION

THE FOLLOWING SAFETY PRECAUTIONS SHOULD BE THOROUGHLY UNDERSTOOD

BEFORE ATTEMPTING TO BEGIN ASSEMBLING THIS MACHINE

1. Select an area for assembly that is clean and free of any

debris which might cause persons working on the
assembly to trip.

2. Do not lift heavy parts or assemblies. Use crane, jack,

tackle, fork trucks or other mechanical devices.

3. Preview the assembly instructions in your operator’s

manual before proceeding further.

4. If the assembly instructions call for parts or assemblies to

be blocked up, use only blocking material that is in good
condition and is capable of handling the weight of the
assembly to be blocked. Also insure that the blocking
material is on a clean, dry surface.

5. Never put hands, or any part of body, under blocked up

assemblies if at all possible.

6. After completing assembly, thoroughly inspect the

machine to be sure that all nuts, bolts, hydraulic fittings
or any other fastened assemblies have been thoroughly
tightened.

7. Before operating the machine, thoroughly read the

operation section of your operator’s manual.

8. Before operating, read the maintenance section of your

operator’s manual to be sure that any parts requiring
lubrication, such as gearboxes, are full, to avoid any
possible damage.

Before operating equipment – If you have any
questions regarding the proper assembly or
operation, contact your dealer or representative.

BALE HAND &

ROTATING BALE HAND

OWNER’S /

OPERATOR’S

MANUAL

MODEL NO.’s

UBH-2072

SSBH-2072

UBH-2072R

SSBH-2072R

JDBH-2072R

GBH-2072R

CAUTION

For Safe Operation

Read Rules And

Instructions Carefully

SI NO LEEINGLES, PIDA AYUDA
A AIGUIEN QUE SI LO LEA
PARA QUE LE TRADUZCA LAS
MEDIDAS DE SEGURIDAD.

Safety Instructions

Assembly & Mounting

Tractor Preparation

Maintenance

Operating Instructions

Repair Parts

BALE HAND

ROTATING
BALE HAND

Содержание GBH-2072R

































Результаты поиска

Содержание GBH-2072R

Отзывы:

Бренды по названию

Популярные бренды

Worksaver GBH-2072R, Руководство владельца/оператора

Результаты поиска

Содержание GBH-2072R

Отзывы:

Бренды по названию

Популярные бренды