3
Never operate broadcast spreader if anyone is within 50 ft. of ATV and spreader.
Never use your hand or fingers to clear a jam of material in the feed gate. Use a clean stick or rod.
When spreading any material, always use safety goggles or safety glasses with side shields.
When spreading, always be aware of the wind direction and that it may carry the material further than normal
spread width.
Use care when working on slopes.
Do not allow tools to cause sparks when working on a battery. BATTERIES PRODUCE EXPLOSIVE
HYDROGEN GAS. A spark could cause an explosion if hydrogen gas is present.
Observe correct polarity (+ and –) on batteries.
Disconnect negative (–) cable first and connect it last.
Avoid excessive speed during operation. Use lower gear to slow forward travel.
Always shut off ATV and shift to “Park” or set brakes when leaving tractor. Remove key when leaving ATV
unattended.
Before operating equipment: if you have any questions regarding the proper assembly or operation, contact
your dealer or representative.
SAFETY INFORMATION
(continued)
SAFETY SIGNS
This SAFETY SIGN is located on the seeder.
This SAFETY SIGN is located
on the mounting frame.
NOTE:
If Safety Sign is missing or damaged,
replace immediately.
ATVK-400 MOUNTING KIT
PARTS LIST
8
