4 of 4
Workrite Ergonomics | 800.959.9675 www.workriteergo.com
Haworth® Slatwall
Before installing Base, loosen the vertical Phillips head screw until the lower clip can be removed.
Replace lower clip with the alternate clip (G) with lip up, as shown below
Using a Phillips head screwdriver, rotate the screw clockwise until the two clips are roughly positioned for
placement on Slatwall.
Return to step 2.
If the installed metal clips do not work with your Slatwall, we provide an alternate clip.
Follow the steps below:
Remove Lower Clip
Alternate Clip (G)
(Lip up)
5
b
b
c
c
dd
a
a
1500253 Rev A
