1 of 4
Workrite Ergonomics | 800.959.9675 www.workriteergo.com
Phillips head screwdriver, 2.5 mm Allen Wrench, 5 mm
Allen Wrench
Conform Monitor Arm
A
Tool Bar/Slatwall
Assembly
Qty: 1
Parts Included
Parts Included, Hardware kit
Tools Required
Assembly & Installation Instructions:
Conform Base, Tool Bar/Slatwall
CONF-BSE-TSB-S
Attach the Base to Tool Bar
Using a Phillips head screwdriver, open or close the jaws so the
metal clips grip both the top and bottom of the Tool Bar/Slatwall
and slide.
Required Parts Sold Separately
B
5 mm Allen Wrench
Qty: 1
E
30 × 7 mm Static Arm Spacer
Qty: 1
F
Sticker
Qty: 1
G
Interchangeable
alternate clip
Qty: 1
C
4 mm Allen Wrench
Qty: 1
D
2.5 mm Allen Wrench
Qty: 1
Do not exceed 48 lb. on Workrite Tool Bar
Do not exceed weight limit for other manufacturers’ Slatwalls.
1
Top Clip
Bottom Clip
