3 of 4
Workrite Ergonomics | 800.959.9675 www.workriteergo.com
Attach the Flat Extension Arm.
Remove M8 x 65 mm Bolt and Washers from Flat Extension Arm (A) as shown.
Place the Flat Extension Arm (A) on Pin, resting on spacer.
Assemble the Bolt and Washers as shown. For the Articulating Arm, use the M8 x 65 mm Bolt from the Flat
Extension Arm (A).
Tighten with a 5 mm Allen Wrench (included with base). Be sure the arm is tight but rotates freely. Snap on
the Pivot Cover Cap B).
Tighten the installed set screw with a 2.5 mm Allen Wrench (included with base).
d
c
b
A
B
B
2
a
b
c
d
e
d
c
b
e
e
a
A
A
Articulating Arms shown
M8 × 65 mm
Static Arm Bolt
M8 × 65 mm
Articulating Arm Bolt
M8 × 65 mm
Static Arm Bolt
Static Arms shown
