Workrite Ergonomics CONF-ACC-1EXT-S Скачать руководство пользователя страница 1

Страница: 1 / 4

1 of 4

Workrite Ergonomics | 800.959.9675 www.workriteergo.com

Conform Flat Extension Arm

Qty: 1

Pivot Cover Cap

Qty: 1

Hook & Loop Strips

Qty: 2

2 mm Spacer

Qty: 1

Parts Included

Required Parts Sold Separately

Tools Required

Assembly & Installation Instructions:

Conform Accessory Flat Extension Arm

CONF-ACC-1EXT-S

A Phillips head screwdriver, 2.5 mm Allen Wrench,

5 mm Allen Wrench

NOTE: Extension cables for monitor power and video

may be required.

Selected Pole Mount option with mounting hardware

Selected Conform Static Arms.

Do not use on hollow core tables.

Do not rotate or suspend arm beyond table surface.

If 3 arms are mounted in series, the maximum monitor weight

in the entire system must not exceed 27 lb.

Do not link more than 3 arms in series.

Содержание CONF-ACC-1EXT-S

Страница 1: ...sory Flat Extension Arm CONF ACC 1EXT S A Phillips head screwdriver 2 5 mm Allen Wrench 5 mm Allen Wrench NOTE Extension cables for monitor power and video may be required Selected Pole Mount option w...

Страница 2: ...emove the Bolt and Washer using a 5 mm Allen Wrench included with base Set aside Bolt and Washer for use in Step 2f Pull out the arm from the pin Remove discard the 4 mm spacer Articulating Arm only I...

Страница 3: ...hown For the Articulating Arm use the M8 x 65 mm Bolt from the Flat Extension Arm A Tighten with a 5 mm Allen Wrench included with base Be sure the arm is tight but rotates freely Snap on the Pivot Co...

Страница 4: ...included with base Be sure the arm is tight but rotates freely Snap on the Pivot Cover Cap Tighten the installed set screw with a 2 5 mm Allen Wrench included with base If 3 arms are mounted in series...