3 of 7
Workrite Ergonomics | 800.959.9675 www.workriteergo.com
Monitor Gap Adjustment for Small Monitors Less Than 17" Actual Width
May be required:
Due to shallow depth environments and monitors less than 17" in actual width, consider moving the pivot head
to the Slotted Pivot Adjustment area of the arm.
Remove cable management covers by sliding them up, then off.
Loosen the set screw using 2.5 mm Allen wrench included with base.
Remove the Pivot Screw using 4 mm Allen wrench included with base.
Remove the Pivot Head.
Maximum 17" actual width monitor
Maximum 17" actual width monitor
b
c
d
a
3
b
c
d
a
Slotted Pivot
Adjustment
Pivot Screw
Pivot Head
