WorkPro WTS 1206, Руководство по эксплуатации, Страница: 28 / 48

26
USER MANUAL FOR WTS TOWERS
Figure 83
Place the reinforcement bars and fix them with
its pins to the frontal legs.
Figure 84
Place the tower in its working position and level
until the bubble level is centered. Wheels
should not get in contact with the ground.
Calculate the load to be lifted with the tower. An
example of basic load calculation is attached
.
ITEM
WEIGHT
(kg)
QUANTITY
TOTAL
(kg)
Truss
accessory
0,75 2 1,5
Complete
truss system
53,3 0,5 26,65
Loads 368 0,5 184
Cables 38 0,5 19
231,15
Figure 85
In this example we have a weight of 231.15 kg.
With that load, see what position the load should
have on the tower fork. Take in account that the
truss is supported by two points of the fork. To
find out which is the largest load, take the
position farthest from the base of the fork.
Figure 86
Choose the WTS tower model. Check for the
value immediately above the load you need.
With this value, take the exact position to which
the accessory for fixing the truss must be placed.