WorkPro W125018A, Оригинальная инструкция по эксплуатации, Страница: 7 / 35

Danger!
The carbon brushes should not be replaced by anyone
but a qualified electrician.
8.3 Maintenance
There are no parts inside the equipment which require
additional maintenance.
9. Disposal and recycling
The equipment is supplied in packaging to prevent it
from being damaged in transit. The raw materials in
this packaging can be reused or recycled. The
equipment and its accessories are made of various
types of material, such as metal and plastic. Never
place defective equipment in your household refuse.
The equipment should be taken to a suitable collection
center for proper disposal. If you do not know the
whereabouts of such a collection point, you should
ask in your local council offces.
10. Storage
Store the equipment and accessories in a dark and dry
place at above freezing temperature. The ideal storage
temperature is between 5 and 30 °C. Store the electric
tool in its original packaging.
speed to the material.
7. Cleaning, maintenance
Danger!
If the power cable for this equipment is damaged, it
must be replaced by the manufacturer or its after-sales
service or similarly trained personnel to avoid danger.
8. Cleaning, maintenance
Danger!
Always pull out the mains power plug before starting
any cleaning work.
8.1 Cleaning
Keep all safety devices, air vents and the motor
housing free of dirt and dust as far as possible. Wipe
the equipment with a clean cloth or blow it with
compressed air at low pressure.
We recommend that you clean the device immedi-
ately each time you have finished using it.
Clean the equipment regularly with a moist cloth
and some soft soap. Do not use cleaning agents or
solvents; these could attack the plastic parts of the
equipment. Ensure that no water can seep into the
device. The ingress of water into an electric tool
increases the risk of an electric shock.
8.2 Carbon brushes
In case of excessive sparking, have the carbon brushes
checked only by a qualified electrician.
7
GB



This product has been marked with a symbol relating to removing electric and electronic waste. This
means that this product shall not be discarded with household waste but that it shall be returned to a
collection system. It will then be recycled or dismantled in order to reduce the impact on the environ-
ment. Electric and electronic equipment can be hazardous for the environment and for human health
since they contain hazardous substances.
Environmental protection