WorkPro W004532A Скачать руководство пользователя страница 5

WARNING!

 

DANGER

If the battery pack is cracked or damaged in any 
other way, do not insert it in the charger 

Do not plug anything other than your Workpro tool 
into the charger, as other objects may touch danger-
ous voltage points or short out parts, which could 
result in fire or electric shock. 

Do not place the tool or charger on an uneven 
surface, as a fall may cause serious damage. 

Never place the tool or charger near or over a heat 
source such as a radiator or heater. 

Do not operate the charger in a cabinet or other 
enclosure unless proper ventilation is provided. 

Use the battery charger indoors only. 

 

If you wish to charge a second battery pack, unplug 
the charger from the mains supply and leave it for at 
least 15 minutes. After this time you can charge a 
second battery pack.

• Do not allow any liquid to come into contact with 

the charger. There is a danger of electric shock. 
Do not position the tool or battery charger near 
water; for example, near a sink, wash bowl or 
toilet. 

• Do not spill liquid of any kind on the tool or 

charger. Doing so may short out parts, Causing 
damage to the product and creating the risk of 
fire or electric shock. 

• To reduce the risk of an electric shock, unplug the 

charger from the power supply before attempting 
to clean it. To clean tool or charger, wipe with a 
damp cloth. Use of any other cleaners is not 
recommended. 

• Do not place any object on to, or allow anything 

to rest on the charger. 

• Make sure that the charger cable is positioned 

where it will not be stepped on, tripped over or 
otherwise subjected to damage or stress. Keep 
the lead away from operating machinery. 

• Do not pull on the lead of the charger to discon-

nect it from the mains power socket. 

• Do not use an extension cord unless it is 

absolutely necessary. The use of an improper 
extension cord could cause the risk of fire, 
electric shock or electrocution. 

• Never attempt to connect two chargers together. 
• Do not charge batteries or use the tool and 

battery pack in locations where the temperature 
may be below 40°F or exceed 104°F such as 
alongside sheds or metal structures. 

• The battery can be charged or operated at 

temperatures between 40°F and 104°F.

ADDITIONAL SAFETY INSTRUCTIONS 

ADDITIONAL SAFETY INSTRUCTIONS FOR THE CHARGER

Your WORKPRO tool with Lithium Ion batteries may 
only be charged with the specific designed Workpro 
Lithium Ion battery charger purchased with the tool. 
IT IS DANGEROUS TO USE ANY OTHER BATTERY 
CHARGER TO CHARGE YOUR TOOL. Do not 
attempt to charge the battery pack with any other 
charger than the one supplied. 

Before using the charger, read all the instructions, 
labels and cautionary markings on the charger and 
battery pack as well as the instructions on using the 
battery pack. 

Do not use the charger if it has been subjected to a 
heavy knock, dropped or otherwise damaged in 
anyway. Take the charger to an authorised service 
centre for a check or repair. 

Do not disassemble the charger. Opening or 
removing covers may expose you to dangerous 
voltages or other risks. Incorrect reassembly can 
cause electric shock when you use the tool or 
charger again. Take the charger to a power tool 
repair centre when service or repair is required. 
Incorrect re-assembly may result in the risk of fire, 
electric shock or electrocution. To reduce the risk of 
electric shock, do not disassemble any part of the 
product.

5

service the machine have to be acquainted with this 
Manual and must be informed about its potential 
hazards. 

Children and frail people must not use this tool. 
Children should be supervised at all times if they are in 
the area in which the tool is being used. It is also 
imperative that you observe the accident prevention 
regulations in force in your area. The same applies for 
general rules of occupational health and safety. 

The manufacturer shall not be liable for any changes 
made to the tool nor for any damage resulting from 
such changes. Even when the tool is used as 
prescribed it is not possible to eliminate all residual risk 
factors. The following hazards may arise in connection 
with the tool’s construction and design: 

Damage to the lungs if an effective dust mask is not worn. 
Damage to hearing if effective ear defenders are not 
worn.  

NEVER CHARGE YOU LITHIUM ION BATTERY 
BELOW OR ABOVE TEMPERATURES RECOMMEND-
ED OTHERWISE FIRE OR SERIOUS DAMAGE TO THE 
BATTERY PACK MAY OCCUR. 

The most suitable temperatures to charge the battery 
pack are between 68 -77°F. 

Содержание W004532A













Отзывы: