DESCRIPTION OF SYMBOLS
WARNING!
When using electric-powered tools, basic safety precautions, including the following, should
always be followed to reduce risk of fire, electric shock, personal injury and material damage.
Read the whole manual carefully and make sure you know how to switch the tool off in an emergency, before
operating the tool.
If the supply cord is damaged, it must be replaced by an electrician or a power tool repairer in order to avoid
a hazard.
Note:
Double insulation does not take the place of normal safety precautions when operating this tool.
The insulation system is for added protection against injury resulting from a possible electrical insulation
failure within the tool.
ELECTRICAL SAFETY
Volts
Hertz
Alternating current
Watts
Direct current
Amp hour
Milliamperes
Newton Meters
No load speed
Revolutions or reciprocation
per minute
Millimetres
Diameter
Thermal cut-out protection
Warning
Indoor use only
Double insulated
Read instruction manual
Wear ear protection
Wear eye protection
Polarity
Lithium Ion battery
Do not use or store battery in
temperatures exceeding 50°C
Recycle battery
Do not put in the garbage
Do not incinerate
Do not get battery wet