Assembly
3730 E. Southern Avenue, Phoenix, AZ 85040 USA
800-778-8779
Workhorseproducts.com
12
Step 4: Leveling the Press
PARTS NEEDED
TOOLS NEEDED
ASSEMBLED PRESS
LEVEL
9/16 WRENCH
TOP BEARING CAP
TOP OF PALLET
LEVELING BOLTS
LEVELING BOLTS
1. To start, place level on top center part of
the pallet.
2. Using the level, start by rotating a pallet
arm so it’s above a base leg. You will use
each leg position as a leveling point.
3. Using a 9/16 wrench, slowly twist leveling
bolts on the bottom of the legs. Adjust
until the level shows that leg is leveled.
4. Repeat step 3 at all 4 legs.
5. Keep the level placed on top of a pallet
and rotate pallet through all stations, be
sure that it remains level in each station.
6. If you’re having problems leveling your
press, contact technical support at
800-778-8779 EXT 2.
Level
Leveling Bolts
