8
3730 E. SOUTHERN AVE., PHOENIX, AZ 85040 | USA
ASSEMBLY
STEP 2: ASSEMBLING THE INNER TUBE AND TOP PLATE
TOOLS NEEDED
PARTS NEEDED
Inner tube
Top plate
Handle bar
2 x Hex Bolts
2 x Lock Washers
2 x Hex Nut
2 x Flat Washers
•
•
•
•
•
•
•
7/16” Ratchet
7/16” Wrench
Turn the top plate over
along with smaller top
plate piece. Line up the
large hole on both pieces
and stack them.
Screw on a lock washer
and a nut to the other end
of the bolt. Repeat to the
other side. At this point,
both of the bolts should
only be tightened by hand.
Line up the hole on the
bottom of the inner tube
with the hole of the top
plate, and stack the inner
tube on top.
Install the angle
adjustment knob into the
threaded hole on top of
the plate.
Insert and hand tighten a
hex bolt with a flat washer
from the bottom of the
plate, so that the end of
the bolt is exposed on top.
Repeat for the other side.
With a 7/16” ratchet and
7/16” wrench tighten the
two bolts. The inner tube
and top plate are now
assembled.
•
•
1.
4.
2.
5.
3.
6.
