Safety Procedures
Workhorse Products has set forth all efforts to design and manufacture safe and dependable machines. However, it is
impossible to predict all situations and circumstances that may cause dangerous conditions. Therefore, Workhorse
Products requires all operators and maintenance personnel use every means possible to ensure the safe operation of
the machine which will, in turn, ensure the safety of the personnel.
Following are the fundamental safety guidelines:
Installation:
o Adequate power supplies (electrical and pneumatic) should be installed and connected by certified technicians.
o The machine should be located in an area with sufficient room to operate.
o The machine should be secured to the floor.
Operation:
o The area around the machine should be maintained in a clean and obstacle free condition.
o The Sabre should only be operated according to the specifications of the machine.
o The operator should make a visual inspection of the machine before operating.
o Safety devices should be inspected daily.
o If the machine does not appear to be functioning properly, immediately stop the operation and attend to all issues/concerns.
o The machine should NEVER be operated unless all safety precautions and devices are in place.
o Maintain a safe distance from all moving parts.
o Loose clothing should not be worn while operating the machine.
o Operators should wear any/all safety equipment necessary to operate the machine.
o Maintain proper settings and adjustments for operation of the machine.
o NEVER attempt to enter in to or crawl under the machine while it is in operation.
o Clear the machine of all garments, ink, and potential hazards at the end of the day.
o Maintain a copy of the Operation & Maintenance Manual within reasonable distance to the machine.
Maintenance:
o Equipment modifications are not allowed without written consent from Workhorse Products.
o All power supplies should be turned off while performing machine maintenance.
o Maintenance of all power supplies (electrical and pneumatic) should be performed by certified technicians.
o Only qualified personnel should perform machine maintenance.
o Maintenance questions/issues/concerns should be directed to Workhorse Products.
The machine operator is responsible for compliance with all safety guidelines set forth and the use of general industry
safety precautions. Personal and property damage claims are disqualified if damages result from operators failing to
follow published safety guidelines
.
3730 E. Southern Avenue, Phoenix, AZ 85040 USA
800-778-8779
Workhorseproducts.com
5
Introduction
