Workhorse Products CapMax Attachment, Руководство пользователя

Страница: 4 / 6

4
Once the back clamp attachment is secured to the press, loosen the hold
down knobs on the back clamp attachment and insert the sub-frame so it
rests against the back clamp attachment extension.
Center the sub frame and loosely tighten the hold down knobs.
Slide the CapMax platen and cap holder attachment until it is positioned
beneath the sub-frame and screen.
Push the CapMax platen and cap holder attachment to the right and
securely tighten the thumb screw on the side of the print arm. Tighten
the thumb screw on the bottom of the print arm as shown.
If the screen needs adjustment, loosening the hold down knobs will
allow the sub-frame to be relocated. Center the screen over the cap
platen allowing for approximately 3/16” overlap.
Assembly
Questions? Give us a call!
800.778.8779
workhorseproducts.com
Visit our website at